瓶盖-瓶坯-容器
CMFLOW™ supports the circular economy. SACMI's solution that combines superior extrusion process quality with energy savings and reduced maintenance.

CMFLOW™ supports the circular economy. SACMI's solution that combines superior extrusion process quality with energy savings and reduced maintenance.

SACMI CCM compression molding presses are now equipped with a next-generation extruder called CMFLOW™, which allows for up to 9% power saving of the energy consumption of the whole CCM.

The purpose of the CMFLOW™ extruder is the same as the previous generations: to melt the resin and continuously feed it to the metering and mixing stations. However, CMFLOW™ takes advantage of a smaller screw with a diameter of 35 mm only. As a result, it achieves a maximum capacity of 200 Kg/hour, the same as a conventional 75 mm diameter extruder.

Benefits CMFLOW™ brings to the process of plastic caps production:

  • Energy saving up to 9 %

  • Up to 50% black spots reduction comparing the same resin processed with traditional extruders.

  • Caps produced with CMFLOW™ extruders offer at least the same resistance to stress cracking as those made with traditional extrusion technology but through processing the plastic at a lower temperature.

Besides being very effective, CMFLOW™ is a simple and compact solution:

  • It allows faster and easier maintenance than traditional extruders since the motor is attached directly to the screw without needing a gear motor.

  • The layout is almost 1 meter shorter than a traditional extruder with a diameter of 75 mm.

CMFLOW™ is the standard of SACMI CCM48SD presses and can be also implemented on CCM24SF and CCM32MC versions

Ruota il tuo device.